DEWALT PRO TOOL KIT

Tickets remaining: 0

0%
0/797

£9.97 per ticket

Competition has ended

Free postal entry information

Check out this impressive DeWalt bundle from Lucky Day Competitions!

 

Whats included:

 

Brushless Framing Nailer

  • Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
  • Cordless design so no hanging leads to deal with
  • User can engage contact trip lock-off and prevent accidental dis-charge of fastener
  • Two speeds or power levels which optimises the nailer for firing all lengths of nails.
  • The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
  • Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees celsius and minimal cleaning/service requirements
  • Class leading vibration and sound figures, offer fantastic user protection
  • Versatile 30 – 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
  • Reversible belt/rafter hook provides increased portability and versatility on the job-site
  • Depths can be easily adjusted using the thumb wheel depth adjuster Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
  • Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
  • Gas free operation offers a significant saving in running costs
  • Tool free stall/jam clearance minimises user down time

 

Brushless 2nd Fix Nailer

  • The new generation of cordless power tool technology means that cordless Lithium-ion battery technology is now able to deliver performance that matches AC (mains) powers or air tools (with a compressor).  This model doesn’t therefore require any gas, so no mess, no smell and no additional purchases, just plug in your battery and away you go.
  • As its part of the XR range from DeWalt the DCN660 is compatible with all of DeWalt’s 18v Li-ion batteries, from 2.0Ah to 5.0Ah.
  • With its quick readiness and bump feed function this model can fire up to 4 nails every second and has the ability to fire nails up to 63mm in soft wood or 50mm in hard wood.
  • It’s designed to avoid any stalls or jams, but if one were to happen there is 2 easy ways to clear them in seconds.. both without the need for additional tools.

 

 

Combi Drill

  • Brushless Motor Technology for excellent efficiency
  • Ultra compact, lightweight design allows use in confined spaces
  • Two speed all metal transmission for increased runtime and longer tool life
  • Drill Driver and Hammer feature for multiple applications
  • 15 position adjustable torque control for consistent screw driving into a variety of materials
  • Intelligent trigger design allows for total control of application
  • Foot LED with delay feature for improved visibility and flashlight functionality
  • Improved ergonomic design with rubber grip over mould improving users comfort
  • Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster

 

Grinder

  • Improved ergonomic slim body for comfort and control
  • 18V Brushless Motor.
  • Constant clutch and e-clutch brake Reduces the kick back reaction in the event of a pinch or stall.
  • Mesh covers restricts dust being sucked through the motor.
  • Rubber Overmould provides enhanced grip and comfort.
  • Two Position Side Handle offers greater comfort and control.
  • Battery Voltage – 18v
  • Battery Chemistry – XR Li-Ion
  • No Load Speed – 9000 rpm
  • Max. Disc Diameter – 125mm
  • Spindle Thread – M14 (22 mm)
  • Weight – 2.5 kg

 

Impact Driver

  • Latest generation 18V XR Li-Ion Brushless Impact Driver.
  • 3 Mode Impact selector improves user control.
  • Improved Brushless motor provides 28% increased torque.
  • 135mm Overall length.
  • 3 LED ‘Halo‘ ring provides maximum illumination of work piece
  • 6.35mm ‘drop and load‘ hex bit holder allows for quick, one handed fitment
  • Aluminium front housing provides greater heat dispersion increasing motor life
  • Ergonomic handle and rubber overmold reduces vibration and user fatigue

 

Reciprocating Saw

  • High performance reciprocating mechanism and lightweight magnesium gearcase offer the user optimised power to weight ratio
  • Intelligent variable speed trigger, lock-off switch and electronic motor brake for quick controlled cuts and enhanced work safety
  • Lever-action keyless blade clamp for quick and easy blade changes
  • Pivoting adjustable shoe with open top for high stability and blade visibility during a cut
  • Four-position blade clamp allows for flush cutting and increased versatility
  • Modular component design for trouble free servicing
  • Rubber coated grip to reduce surface vibration and user fatigue
  • Improved ergonomic design

 

Multi Tool

  • DeWalt® brushless motor delivers up to 57% more run time over brushed
  • Quick-Change™ accessory system allows blades and attachments to be changed quickly without wrenches
  • Dual-Grip™ variable speed trigger gives users ultimate speed and application control
  • Bright LED light illuminates dark work surfaces for accurate cutting
  • DeWalt Oscillating Tool Guide System allows users to set the depth or height for accurate repeatability

 

Jigsaw

  • Part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster
  • Powerful & Highly efficient DeWalt PM47 fan-cooled motor with replaceable brushes. delivers fast cutting action up to 3000 strokes per minute maximising user productivity
  • Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
  • Tool-free adjustable shoe with anti-scratch cover bevels 45° in both directions
  • Quick and easy patented keyless blade change system

 

Circular Saw

  • Highly efficient PM58 DeWalt fan cooled motor with replaceable brushes that are capable of delivering up to 3700rpm for very fast cutting applications using the 165mm TCT blade.
  • Durable tool design on these DCS391N circular saws include cast magnesium base for repeated accurate cuts, an ergonomic handle set with a rubber overmould for increased user comfort and safer use
  • Intelligent trigger action and keyless bevel angle and depth of cut adjustment with easy to read scale allow for maximum cordless versatility when using these DeWalt circular saws.
  • Ultra thin kerf 165mm 24tooth carbide tipped blade allowing for efficient run time and fast, smooth cut finish allowing 55mm depth of cut

 

SDS

  • Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm
  • Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
  • Best in class vibration, 6.9m/s² reduces user fatigue and maximises operating periods
  • Bright white LED with delay feature improves visibility

 

Planer

  • Brushless Motor – Increased power and runtime
  • Lightweight – only 3.1 Kg with battery, weighted towards the front of the trigger to reduce any physical strain during use
  • Soft grip handle offers end-users optimum comfort and manoeuvrability during a wide range of applications
  • On board blade storage and torx key – for quick and easy blade changes
  • 2.0mm Depth of Cut – For large material removal
  • Fine indexed, accurate depth adjustment knob allows for maximum precision with 0.1mm increments
  • Front and rear shoe milled in situ – For increased accuracy
  • Part of the intelligent XR Lithium-Ion Series designed for efficiency and making applications faster
  • Air lock port – compatible with DeWalt Airlock dust extraction system or DWV9390-xJ Dust Bag
  • Foot lock off – stands the tool above the work surface
  • Market leading 9.00mm rebate capacity making it ideal for minor on-site alterations and fixes

Planer Bag

  • Large capacity dust collection bag
  • Spring loaded for easy emptying
  • Left or right mounting
  • Compatible with: DCP580

 

What is included:

  • 1 x DCN692N Brushless Framing Nailer
  • 1 x DCN660N-xJ Brushless 2nd Fix Nailer
  • 1 x DCD795N Combi Drill
  • 1 x DCG405N Grinder
  • 1 x DCF887 Impact Driver
  • 1 x DCS380N Recip Saw
  • 1 x DCS355 Multi Tool
  • 1 x DCS331N Jigsaw
  • 1 x DCS391N Circular Saw
  • 1 x DCH253 SDS
  • 1 x DCP580N Planer
  • 1 x DWV9390 Planer Bag
  • 5 x 4.0Ah Batteries
  • 1 x DCB115 Charger
  • 1 x DE9883 24″ Large Duffel Heavy Duty Tool Bag
  • 3 x DS300 1-70-322 Toughsystem Storage Case
  • 1 x DCL040 Torch

 

DeWalt 18V XR 184mm XPS Slide Mitre Saw (Body Only)

 

The DeWalt DCS365N Mitre Saw is perfect for DIY enthusiasts and professionals alike, due to it’s robust build quality and portability. The powerful double insulated 65mm fan cooled motor provides maximum power for cutting hardwood, with the aluminium base giving excellent stability, making it perfect for completing intense work accurately. The horizontal guide rails allow for larger materials with the dual fence mechanism providing maximum support for large material cuts at any angle. The saw can be set up easily and quickly thanks to the mitre and bevel angle detents, with the XPS shadow line cut indicator helping to increase productivity by allowing for accurate and fast alignment of the blade, whilst also illuminating the work piece.

 

Features:

  • Double insulated DeWalt 65 mm fan cooled motor with replaceable brushes for maximum power in hard wood
  • New mitre angle adjustment system provides accurate and consistent setting of mitre angles between 0 and 48° right and 0 and 48° left
  • The dual fence mechanism gives maximum support in large material cuts at any angle or combination of angles
  • Horizontal rails create additional capacity for larger materials
  • The aluminium base construction provides stability to the saw while still retaining its portability
  • Mitre and bevel angle detents for quick and easy set up of the saw
  • XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity

 

Specification:

  • Power Output – 590 Watt
  • Voltage – 18 V
  • Blade Speed – 3750 rpm
  • Blade Diameter – 184 mm
  • Blade Bore – 16 mm
  • Bevel Capacity – 48 °
  • Mitre Capacity [right/left] – 48/48 °
  • Cutting Capacity at 90°/90° (W x H) – 250 x 50 mm
  • Cutting Capacity at 45°/90° (W x H) – 176×50 mm
  • Cutting Capacity at 90°/45° (W x H) – 250×35 mm
  • Max. Cutting Capacity at 45°/45° – 176×35 mm
  • Weight – 11.5 kg
  • Depth – 590 mm
  • Length – 490 mm
  • Height – 590 mm
  • Hand/Arm Vibration – Cutting Wood – <2.5 m/s²
  • Uncertainty K 1 (Vibration) – 1.5 m/s²
  • Sound Power – 93 dB(A)
  • Sound Power Uncertainty – 2.0 dB(A)
  • Sound Pressure – 88 dB(A)
  • Sound Pressure Uncertainty – 2.0 dB(A)

 

DeWalt  210mm Compact Table Saw 240V

 

The DeWalt DWE7485 210mm compact table saw is an excellent addition any tool kit, being perfect for a wider range of cutting applications, from cutting flooring to size, building fitted units, sizing timber for joinery, cutting plinths and more. The high power motor provides extended durability, efficiency and the power to cut all construction timbers. The Duel rack and pinion fence system provides increased accuracy whilst insuring no perpendicular movement occurs to the position of the fence in use. The two position fence offers increased capacity with max 610 rip capacity and allows for cutting of a wide range of materials/sizes.

 

Features:

  • High power motor for extended durability, efficiency and power to cut all construction timbers
  • Dual Rack & Pinion Fence System – Increased accuracy
  • 2 Position Fence with Max 610 rip Capacity
  • 65mm depth of cut at 90 °, 45mm at 45°
  • One Handed Bevel Control for quick/accurate bevel adjustment and lock
  • NoVolt Release Switch for added safety
  • Cast Aluminium Bed for increased rigidity and improved accuracy
  • Compact size and low weight for improved portability
  • AIRLOCK compatible dust extraction for improved health/safety and cleaner jobsites
  • ToolConnect ready (tag is NOT included) provides the option for jobsite connectivity for inventory management

 

Specification:

  • No Load Speed: 5800rpm
  • Blade Diameter: 210mm
  • Blade Bore: 30mm
  • Max. Ripping Capacity [right]: 622mm
  • Max. Ripping Capacity [left]: 318mm
  • Max. Depth of Cut at 90°: 65mm
  • Max. Depth of Cut at 45°: 45mm
  • Table Size: 485 x 485mm
  • Weight: 22kg
  • Product Code: DWE7485-GB
  • Barcode: 5035048723388

More Information